Fittings

Available Fittings.

All products listed below are available from Sani-Loo^® please contact us for further information on any product listed below.

Ball Valves

These ball valves are IMCI approved to ISO standard 9093-2 and are ideal for controlling inlet and outlet water requirements.

The shells of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis.

The internal workings are moulded in a Teflon enhanced polymer for a smooth action, also ensuring continuous ease of operation over many years.

Position Monitored Ball Valves

Position Monitored Ball Valves are fitted with sensors, which enable remote indication of the valve as to whether it is in the closed or open position.

These valves can be easily wired to the engine ignition switch to enable startup to only occur when the water intake valve is open – helping to avoid possible engine overheating caused by accidental or inadvertent water intake closure.

Our valves coupled with a Seacock Monitor enables display monitoring of the status of all the seacocks on a vessel. This does away with the hassle of obtaining visual confirmation of seacocks mounted in inaccessible areas.

As with many of our products, these valves are IMCI approved to ISO standard 9093-2

Vented Loops

This 12 Volt Solenoid activated Vented Loop is designed to be fitted into the intake pipe for a Electric Toilet and wired to the Toilet operating switch.

When the toilet pump is operated water is sucked in through this intake pipe and the solenoit shuts off during this proces to allow maximum intake flow.

When the toilet pump is stopped the solenoid opens to then act as a syphon break to stop water syphoning back into the toilet system the same way that a manual vented loop operates.

Available in White only

Y Pieces

Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain hoses to branch into one line.

Manufactured in Glass Reinforced Nylon 6 Polymer, they are extremely tough and will handle both hot and cold water.

Reducers

A range of reducers to connect different sized hoses.

Available in 6 sizes, white only :

• Cat No. 1399A – Reducer 19mm -> 13mm
• Cat No. 1399B – Reducer 19mm -> 16mm
• Cat No. 1399C – Reducer 25mm -> 19mm
• Cat No. 1399D – Reducer 32mm -> 25mm
• Cat No. 1399E – Reducer 38mm -> 25mm
• Cat No 1399F – Reducer 38mm -> 32mm

Connectors

Hose Connectors to join 38mm,32mm, 25mm, 19mm and 13mm hose sizes.

Manufactured from a glass reinforced nylon composite material (as are a significant proportion of our products) these connectors display high strength and high durability.

Available in 5 sizes, and in black only :

• Cat No. 1401A – 13mm -> 13mm (½”)
• 
Cat No. 1401B – 19mm -> 19mm (¾”)
• Cat No. 1401C – 25mm -> 25mm (1″)
• Cat No 1401D – 32mm ->32mm (1¼”)
• Cat No. 1401E – 38mm -> 38mm (1 ½”)

Skin Fittings Above Water

This range of Above Water Skin Fittings (as well as below water) are the only plastic skin fittings to be certified by the International Marine Certification Institute (IMCI) in Belgium.

The ISO 9093-2 Certification was gained after exhaustive testing was carried out in accordance with the IMCI.

 Designed and manufactured in New Zealand , our skin fittings are manufactured in a special grade of glass reinforced Nylon composite, resulting in a quality product with high impact and tensile strength.



Above Water Skin Fittings available in white only.

• Cat No 1289A – ½” BSP 13mm Tail New July 09
• Cat No. 1289B – ¾” BSP 19mm Tail
• Cat No. 1289C – 1″ BSP 25mm Tail
• 
Cat No. 1289D – 1″ BSP 28mm Tail
• Cat No. 1289E – 1¼”BSP 32mm Tail
• Cat No. 1289F – 1½”BSP 38mm Tail
• Cat No 1289G – 2″ BSP 50mm Tail New July 09

Features :

• Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
• All our skin fittings are supplied with a Nylon washer to increase locknut support on through hull assembly.
• The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.

Skin Fittings Below Water

Below Water Skin Fittings available in both black and white.

• Cat No 1253A – 1/2″ BSP 12mm ID New July 09
• Cat No. 1253B – ¾” BSP 19mm ID
• Cat No. 1253C – 1″ BSP 24mm ID
• Cat No. 1253D – 1¼”BSP 31.5mm ID
• Cat No. 1253E – 1½”BSP 37mm ID
• Cat No. 1253F – 2″ BSP 48mm ID

Features :

• Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
• All our skin fittings are supplied with a Nylon washer to increase lock nut support on through hull assembly.
• The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.

The Aqua Alarm Range
The aqualarm system provides early warning when a Marine Sewage Holding Tank is nearly full. The system is comprised of a panel indicator and sensor switch.

Features :

• The System is designed to operate on 12 volt DC
• Comprehensive installation instructions
• Stainless Steel fastenings
• Internal wire tinned against corrosion
• Full service and parts backup
• Two panel installation options; surface mount and a recessed units available