Accessories.
Sani-Loo® can provide a wide range of accessories to facilitate installation of your Onboard Sewage Treatment System.
The range includes fittings and valves for plumbing and connecting your system.
Ask about the Sani-Loo® Level Control Switch that can be supplied to fit existing installations.
Manual Aquavalve
The Aquavalve® has been designed as a two way diverting Marine Valve to divert treated or untreated sewage into a holding tank or treatment system. This valve is ideal for marine and industrial applications. Manufactured in a super tough glass reinforced nylon composite, the Aquavalve® is robust, and can handle hot or cold water, as well as waste treatment chemicals.
This valve is attached to the bulkhead where pipes are seen.
Electronic Aquavalve®
The Electronic Aquavalve® allows the diverting valve to be operated with the push of a button on the supplied control panel.
The indicators on the control panel show the current position of the valve. The valve has two positions ‘holding tank’ or ‘overboard’
Electronic Aquavalve Control Panel.
Generally supplied with Electronic Aquavalve®‘s on purchase, these panels can also be purchased as a stand alone item if such a need arises.
This panel gives the user control of the direction of effluent from the Aquavalve® to either a Holding Tank or Overboard.
Two lights on the panel clearly indicate the position the Aquavalve® is in – Overboard or Holding tank. (One control panel is always included with each Electronic Aquavalve®)
Hoses and Hard Piping.
Cheap 25mm marine sanitation hose (sometimes marked odour free) retails for around $12 – $15 only lasts 12 to 18 months before it will permeate. A rubber approved sanitation hose that costs around $55 – $65 per metre will last 10 years.
Hard Piping (must be high pressure PVC water pipe CLASS 18) will last the life of the boat and will never permeate.
Professionals use hard pipe and amateurs use hose.
25mm hard pipe costs around $15 – $18 per metre so is a good alternative to hoses.
You will need to put hose at each end but the bulk of the piping should be hard pipe.
Ball Valves
These ball valves are IMCI approved to ISO standard 9093-2 and are ideal for controlling inlet and outlet water requirements.
The shells of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis.
The internal workings are moulded in a Teflon enhanced polymer for a smooth action, also ensuring continuous ease of operation over many years.
Position Monitored Ball Valves
Position Monitored Ball Valves are fitted with sensors, which enable remote indication of the valve as to whether it is in the closed or open position.
These valves can be easily wired to the engine ignition switch to enable startup to only occur when the water intake valve is open – helping to avoid possible engine overheating caused by accidental or inadvertent water intake closure.
Our valves coupled with a Seacock Monitor enables display monitoring of the status of all the seacocks on a vessel. This does away with the hassle of obtaining visual confirmation of seacocks mounted in inaccessible areas. As with many of our products, these valves are IMCI approved to ISO standard 9093-2
Vented Loops
This 12 Volt Solenoid activated Vented Loop is designed to be fitted into the intake pipe for a Electric Toilet and wired to the Toilet operating switch.
When the toilet pump is operated water is sucked in through this intake pipe and the solenoit shuts off during this proces to allow maximum intake flow.
When the toilet pump is stopped the solenoid opens to then act as a syphon break to stop water syphoning back into the toilet system the same way that a manual vented loop operates.
Available in White only
Y Pieces
Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain hoses to branch into one line.
Manufactured in Glass Reinforced Nylon 6 Polymer, they are extremely tough and will handle both hot and cold water.
Reducers
A range of reducers to connect different sized hoses.
Available in 6 sizes, white only :
- Cat No. 1399A – Reducer 19mm -> 13mm
- Cat No. 1399B – Reducer 19mm -> 16mm
- Cat No. 1399C – Reducer 25mm -> 19mm
- Cat No. 1399D – Reducer 32mm -> 25mm
- Cat No. 1399E – Reducer 38mm -> 25mm
- Cat No 1399F – Reducer 38mm -> 32mm
Connectors
Hose Connectors to join 38mm,32mm, 25mm, 19mm and 13mm hose sizes.
Manufactured from a glass reinforced nylon composite material (as are a significant proportion of our products) these connectors display high strength and high durability.
Available in 5 sizes, and in black only :
- Cat No. 1401A – 13mm -> 13mm (½”)
- Cat No. 1401B – 19mm -> 19mm (¾”)
- Cat No. 1401C – 25mm -> 25mm (1″)
- Cat No 1401D – 32mm ->32mm (1¼”)
- Cat No. 1401E – 38mm -> 38mm (1 ½”)
Skin Fittings Above Water
This range of Above Water Skin Fittings (as well as below water) are the only plastic skin fittings to be certified by the International Marine Certification Institute (IMCI) in Belgium.
The ISO 9093-2 Certification was gained after exhaustive testing was carried out in accordance with the IMCI. Designed and manufactured in New Zealand , our skin fittings are manufactured in a special grade of glass reinforced Nylon composite, resulting in a quality product with high impact and tensile strength.
Above Water Skin Fittings available in white only.
- Cat No 1289A – ½” BSP 13mm Tail New July 09
- Cat No. 1289B – ¾” BSP 19mm Tail
- Cat No. 1289C – 1″ BSP 25mm Tail
- Cat No. 1289D – 1″ BSP 28mm Tail
- Cat No. 1289E – 1¼”BSP 32mm Tail
- Cat No. 1289F – 1½”BSP 38mm Tail
- Cat No 1289G – 2″ BSP 50mm Tail New July 09
Features :
- Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
- All our skin fittings are supplied with a Nylon washer to increase locknut support on through hull assembly.
- The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.
Skin Fittings Below Water
Below Water Skin Fittings available in both black and white.
- Cat No 1253A – 1/2″ BSP 12mm ID New July 09
- Cat No. 1253B – ¾” BSP 19mm ID
- Cat No. 1253C – 1″ BSP 24mm ID
- Cat No. 1253D – 1¼”BSP 31.5mm ID
- Cat No. 1253E – 1½”BSP 37mm ID
- Cat No. 1253F – 2″ BSP 48mm ID
Features :
- Use of the unique grade of glass reinforced Nylon composite provides high impact and tensile strength.
- All our skin fittings are supplied with a Nylon washer to increase lock nut support on through hull assembly.
- The use of glass reinforced Nylon skin fittings eliminates corrosion, and avoids electrolysis problems.
The Aqua Alarm Range
The aqualarm system provides early warning when a Marine Sewage Holding Tank is nearly full. The system is comprised of a panel indicator and sensor switch.
Features :
- The System is designed to operate on 12 volt DC
- Comprehensive installation instructions
- Stainless Steel fastenings
- Internal wire tinned against corrosion
- Full service and parts backup
- Two panel installation options; surface mount and a recessed units available
